Portable vibration analyzerMeasure vibration. Know what is wrong in seconds.

Attach the sensor and press START. VIBE ANALYZER evaluates machine condition, flags the likely fault and recommends the next step — without complicated spectrum interpretation.

Android + WindowsInstant PDF report2 h training includedDirect manufacturer support
VIBE ANALYZER measuring vibration on a bearing housing
Measurement resultWARNING

Bearing · developing damagePlan an inspection and follow the trend.

Developed & made in the Czech RepublicService included
24-bit analyzerProfessional measurement hardware
30,000+ bearingsFault-frequency database
from €4,08012 instalments, no surcharge
Czech development · Worldwide support

Developed and made in the Czech Republic. Service included.

Based in Milevsko, Czech Republic, VibeDynamics develops the VIBE ANALYZER hardware and software. The instruments are made in the Czech Republic, and we service them ourselves. We supply customers worldwide and provide remote and on-site technical support.

Czech development, production and service

Hardware and diagnostic software developed by our team, instruments made in the Czech Republic, service from the people who built them.

Worldwide delivery

We supply VIBE ANALYZER instruments internationally. Contact us for a quotation covering your destination and delivery requirements.

Worldwide service & commissioning

On-site vibration diagnostics, balancing, commissioning support, troubleshooting and operator training — backed by remote technical assistance.

How it works

Three steps. No complicated setup.

The operator needs the sensor, a phone or laptop and basic training. The app guides the measurement and evaluates the result.

01

Attach the sensor

The magnetic sensor goes on the bearing housing. USB-C connects to the phone or laptop. No batteries or charging.

02

Press Measure

The app guides the user step by step. QR/NFC tags keep route points consistent.

03

Read the result

Normal / Warning / Alarm, a likely fault and a recommendation. Create a PDF report straight in the app.

Automatic diagnostics

Five common fault types that stop rotating machinery.

Routine users see a simple verdict. Analysts can always open the complete spectra and detailed values.

1× RPM

Imbalance

Typical vibration pattern caused by contamination, wear or rotor damage.

1× / 2× RPM

Misalignment

Helps identify coupling alignment problems and related bearing load.

Harmonics

Mechanical looseness

Loose feet, play in the mounting or insufficient structural stiffness.

Envelope + database

Bearing damage

A 30,000+ bearing database compares BPFO, BPFI, BSF and FTF with the envelope spectrum.

Electrical components

Electrical fault

Flags spectral patterns associated with the electrical part of a motor.

Expert within 24 h

Not sure?

Send the recording to our analyst. Ten remote evaluations are included with the instrument.

An answer, not a graph to decode

A ready diagnosis and report for maintenance and management.

VIBE AI turns a measurement into a PDF with machine condition, diagnostic model results and a concrete recommendation. Expert data remains available whenever you want to go deeper.

  • Severity evaluation using selected limits and ISO profiles
  • FFT, time waveform and envelope spectrum for detailed analysis
  • Route trends and comparison across measurement points
  • Save or share the report directly from the app
VIBE AIVibration diagnostic report
ID: AI-20260423-1521
2026-04-23 · 15:21
Machine
Ventilátor VZT-03
Point
B1
Bearing
6224-NTN
Speed
789 RPM
ISO 20816-3 · severity3.187 mm/s
ABCD

Diagnostic model scores

Imbalance49.1%
Misalignment0.0%
Looseness0.0%
Electrical0.0%
Bearing fault87.0%

Frequency match · 6224-NTN

Freq.Theor.Detected
BPFI77.6 Hz2×–10×Confirmed 80%
BPFO53.9 Hz1×–10×Confirmed 79%
BSF35.4 Hz3×–9×Confirmed 77%
FTF5.39 Hz—No match

Recommendation: Bearing replacement recommended. Phase 4 — advanced damage. Until then shorten the monitoring interval to 3 days.

Sample VIBE AI report
Interactive demo

Try the app right now. No device needed.

The VIBE APP demo runs in your browser. Measure a simulated fan and follow the same steps as on site: machine condition, spectrum, bearing envelope and a finished PDF report.

  • 6 machine conditions – from healthy to a damaged bearing
  • VIBE AI report as a PDF download
  • Route, lubrication (Grease) and balancing
  • On desktop and phone, no sign-up
Condition screen in the VIBE APP demoStart the demo
Plant example

A bearing problem detected ahead of a planned shutdown.

VIBE ANALYZER connected to a phone during a plant measurement
Fan · industrial plant · 2025

The trend showed developing damage before the service window.

VIBE ANALYZER recorded a change in bearing condition roughly six weeks before the planned service window. That allowed the part and replacement to be prepared rather than waiting for a breakdown.

~6 weeksbefore the service window
plannedinstead of emergency work
trendnot just one reading

This describes a specific earlier measurement; lead time and benefit vary by machine and fault.

Why VIBE

Simple for maintenance. Expert when you need the detail.

A

Diagnostics in the app

For routine checks, condition, likely fault and recommendation are enough.

USB

Your phone or PC

No extra screen or batteries. Power and data use one USB-C cable.

24h

An expert when needed

Use remote specialist evaluation for unclear cases.

CZ

Direct support

You work directly with our development and service team in Milevsko, Czech Republic — with worldwide delivery and service.

Measurement core

Professional hardware behind a simple workflow.

24 bitmeasurement converter
±100 gaccelerometer range
2 Hz–12 kHzfrequency band
USB-Cpower and data

Hardware and technical details

How to start

Prove the value on your own machines first.

Start with one on-site visit for €370 or a 3-month pilot for €1,030. The full pilot fee is credited if you buy.

Fastest start

On-site demo measurement

€370

Visit, measurement of up to 5 machines, ISO report and explanation of the results. No purchase obligation.

Book a measurement
Custom diagnostic software

Some measurement tasks need their own application.

Heat pumps, linear axes, blade arrangement. We build software around your measurements, operators and required output.

Heat pumps: deviations from a reference — Application preview · unified visual concept
References

Where VIBE ANALYZER and our services are used.

Scania

Blade natural-frequency measurement and a blade placement app

Acond

VIBE ANALYZER and the Compare app for checks against a reference unit

BEST

VIBE ANALYZER with Wi-Fi connection

Teplárna Český Krumlov / Carthamus

VIBE ANALYZER

VAFO

VIBE ANALYZER

Gyptech SE

Analyzers used for diagnostics

PRO.MED.CS

Fan diagnostics

Subterra

Fan refurbishment

TCF Europe

Fan projects

See what VIBE ANALYZER finds on your machine.

We will measure your most troublesome machine and show you the result on your own data before you decide anything.

Book a measurement