Hardware + software

Professional sensor. Smart app. A result you can act on.

Developed by VibeDynamics and made in the Czech Republic, VIBE ANALYZER combines our own hardware and diagnostic software. Service is included. We deliver worldwide and provide manufacturer support. The same hardware can be upgraded to the balancing edition later.

Buying guide → · Try the app demo → · Android app on Google Play → · Technický list CZ (PDF)

VIBE ANALYZER hardware
24 bitADS measurement converter
±100 gacceleration range
2 Hz–12 kHzfrequency band
27 kgmagnetic holding force
Daily workflow

From unpacking to a report in three steps.

01

Attach

Place the magnetic sensor on the bearing housing and connect USB-C to a phone or computer.

02

Measure

Select the measurement and press START. Standard captures are 1, 2, 4 or 8 seconds.

03

Decide

Read the condition and recommendation, then save a PDF report or open the detailed spectra.

Technical data

The hardware in numbers.

Values from the datasheet. The full datasheet is available as a PDF.

Sensor
MEMS accelerometer
Measuring range
±100 g
A/D converter
24 bit
Frequency band
2 Hz – 12 kHz
Sampling
31.2 kSPS
FFT resolution
0.125 – 1 Hz
Measurement time
1 – 8 s
Magnet clamping
27 kg
Weight
120 g
Interface
USB-C · no batteries
Platforms
Android · Windows
Warranty
24 months · maker service
What is included

A full predictive-maintenance toolkit.

R

Smart QR/NFC routes

Identify points, assign bearings, set ISO or custom limits and build trends over time.

B

Bearing diagnostics

Envelope analysis plus a 30,000+ bearing database for BPFO/BPFI/BSF/FTF matching.

FFT

Measurement & analysis

Acceleration, velocity, displacement, time signal, FFT, envelope and waterfall tools.

AI

VIBE AI report

A ready PDF with condition, detected patterns and recommendations straight after measurement.

API

Integration

HTTP/API options for connecting measurement data to maintenance systems and workflows.

24h

Remote expert

Ten specialist evaluations are included; optional Cloud Expert supports ongoing use.

VIBE AI report

A finished diagnosis you can send to management.

The PDF report is created right after the measurement, with no extra software.

  • Machine, measuring point and bearing type
  • Severity per ISO 20816-3 / ISO 14694 (zone A–D)
  • Scores of 5 diagnostic models
  • Bearing frequency match table (BPFI / BPFO / BSF / FTF)
  • Bearing wear phase
  • Recommendation and next measurement date
VIBE AIVibration diagnostic report
ID: AI-20260423-1521
2026-04-23 · 15:21
Machine
Ventilátor VZT-03
Point
B1
Bearing
6224-NTN
Speed
789 RPM
ISO 20816-3 · severity3.187 mm/s
ABCD

Diagnostic model scores

Imbalance49.1%
Misalignment0.0%
Looseness0.0%
Electrical0.0%
Bearing fault87.0%

Frequency match · 6224-NTN

Freq.Theor.Detected
BPFI77.6 Hz2×–10×Confirmed 80%
BPFO53.9 Hz1×–10×Confirmed 79%
BSF35.4 Hz3×–9×Confirmed 77%
FTF5.39 Hz—No match

Recommendation: Bearing replacement recommended. Phase 4 — advanced damage. Until then shorten the monitoring interval to 3 days.

Sample VIBE AI report
VIBE ANALYZER connected to a phone during measurement
Platforms

Runs on devices you already use.

The interface is available for Android and Windows. Route data and measurements can be moved between devices.

  • Android phones and tablets
  • Windows 10/11 computers and tablets
  • USB-C power and data — no analyzer battery
  • iOS version via a Wi-Fi bridge is in development

See what VIBE ANALYZER finds on your machine.

We will measure your most troublesome machine and show you the result on your own data before you decide anything.

Book a measurement